Salko UK’s expertise in the design, installation, testing and maintenance of electrical systems has helped organisations of all sizes to implement flexible, scalable and manageable solutions that cater for all their needs today and into the foreseeable future.

Our philosophy is to combine quality and  service, whether you require a turnkey solution or are simply relocating or restructuring your current arrangements. Salko UK’s experience and expertise will ensure minimal disruption and quality results delivered safely.

Learn more about our Mining sector work

What we do

Our current services include:

• New Installation (covering all station instruments and LV systems)
• Maintenance Services and Fault Diagnostics (routine and unplanned support)
• Initial and Periodic Inspection and Testing (including PAT Testing)
• ATEX / Hazardous Area Work (New install; Maintenance services; and Inspection)
• System design and energy case studies (excluding instrumentation systems)
• Site electrical supply survey, energy consumption plan and provision and installation of additional site temporary supplies
• Combined with Mechanical support

Where we do it

Some systems we have worked on:

• Power and Lighting (including emergency lighting systems)
• Power distribution (LV)
• Primary and secondary containment
• Conveyance systems
• Motor control systems
• Motor and pump installation
• Ventilation systems
• Winder / Winch systems
• Dewatering systems
• Processed water systems
• Compressed air systems
• Hydraulic and pneumatic systems
• Machinery Hook-ups
• Fire alarm systems
• AV/IT installations
• Security services
• Temporary 110v site supplies and power
• Earthing & Bonding system
• Instrumentation installation, testing and calibration
• HVAC systems

Manpower provisions include the following:

• Site management
• Project Management
• QA / QC
• EHS Advisors
• Electricians
• C&I Technicians
• Operatives (Grade 3)
• Fork Lift Truck Operatives
• Material Handling
• Roto Drivers
• Site administrative support

Our capability in the procurement, installation and testing of mechanical systems is extensive, with its roots in the new construction of multiple sites throughout the UK.  We are able to offer you services from complete new installations, to modification to existing systems through to onsite planned maintenance and repairs for unplanned maintenance.

We can offer the entire scope of required works for your plant or design, from the sourcing and procurement of the materials through to the installation and testing.  This includes the required qualified and experienced fitters, coded welders and site management to pull it all together to complete your project safely, with the required quality both on time and on budget.

Learn more about our Mining sector work

What we do
Our current services include:

• New Installations (for upgrades provided by others)
• Maintenance Services (routine and unplanned support)
• Pipe fitting (including Swagelok), onsite fabrication works, removal/refitting of instrumentation
• Mechanical Design
• Project Management and Quality Management
• Coded Welders, welding plant and consumables
• Pressure Testing and Leak Testing
• NDT services and heat treatment (with established partners)
• Combined with EC&I support
• Commissioning Systems
• Specialist dedicated tooling container
• Utility Services
• Site Infrastructure
• Full quality pack production
• Turnkey solutions

Where we do it

Some systems we have worked on:

• Piping systems including piping support systems
• Vessel and Tanking systems
• Motor and Pump installation
• Steel fabrication (design, supply & install)
• Ventilation systems
• Ducting supply and installation
• Winder / Winch installation
• Dewatering systems
• Processed water systems
• Compressed air systems
• Hydraulic and pneumatic systems

Manpower provisions include the following:

• Site management
• Project Management
• QA / QC
• EHS Advisors
• Pipe Fitters
• Welders (Coded / Pressure)
• Mechanical Fitters
• Platers
• Operatives (Grade 3)
• Fork Lift Truck Operatives
• Material Handling
• Riggers / Rigger Crane Drivers
• Roto Drivers
• Site administrative support

Salko UK’s expertise in the design, installation, testing and maintenance of electrical systems has helped organisations of all sizes to implement flexible, scalable and manageable solutions that cater for all their needs today and into the foreseeable future.

Our philosophy is to combine quality and service, whether you require a turnkey solution or are simply relocating or restructuring your current arrangements.

Salko UK’s experience and expertise will ensure the desired outcome of increased performance and efficiency, whilst reducing maintenance downtime, minimal disruption and quality results delivered safely.

Learn more about our Industrial sector work

What we do

Our current services include:

• New Installation (covering all station instruments and LV systems)
• Maintenance Services and Fault Diagnostics (routine and unplanned support)
• Initial and Periodic Inspection and Testing (including PAT Testing)
• ATEX / Hazardous Area Work (New install; Maintenance services; and Inspection)
• System design and energy case studies (excluding instrumentation systems)
• Site electrical supply survey, energy consumption plan and provision and installation of additional site temporary supplies
  

Where we do it

Some systems and projects we have worked on:

• Power and Lighting (including emergency lighting systems)
• Power distribution (LV)
• Motor control systems
• Primary and secondary containment
• Machinery Hook-ups
• Fire alarm systems
• AV/IT installations
• Security services
• Temporary 110v site supplies and power
• Earthing & Bonding system

We understand how important your equipment is to your business, therefore, we offer a full onsite calibration service to help minimise downtime and loss of revenue.

Salko’s expert technicians specialise in onsite plant calibrations, delivered safely, to schedule and with the quality right the first time.

Learn more about our Industrial sector work

What we do

Our current services include:

• New Installations (covering all station instruments)
• Maintenance Services, Fault Diagnostics and Calibration (routine and unplanned support)
• ATEX / Hazardous Area Work (New install; Maintenance services; and Inspection)
• Instrumentation, control & automation, PLC, DCS and SCADA solutions
• Transducer calibration, Data system Calibration and Physical End to End Calibration
• System commissioning

Where we do it

Some systems and projects we have worked on:

• Pressure and temperature measurements systems from sensor to control system
• Vibration monitoring systems
• ATEX hazardous area inspections & reports
• Pneumatic and hydraulic valve operated systems
• Motor and pump control systems
• Position controllers
• Water & Wastewater systems

At Salko we have a strong reputation for the professional delivery of fabrication, installation and repair welding. Our expertise is underpinned by a comprehensive library of Welding Procedure Specifications. Mechanical integrity is assured through formal qualification to both ASME and British/ISO standards.

The team is made up of highly experienced industry professionals who are coded to both ISO and ASME standards. We specialise in manual arc welding processes covering MMA, MIG, MAG, TIG and Flux Cored. Through our technical support team we are able to deliver orbital and mechanised welding techniques and other processes as applications and requirements arise.

Our welders are coded to both ISO and ASME standards for pipework, pressure vessels, ducting, tanks and structural work. We cover carbon and creep resisting alloy steels, cryogenic steels, austenitic stainless and high nickel alloys. We are also able to quickly qualify and deliver to any additional requirements of our clients as needs arise. This can be a valuable benefit when responding to emerging demands common within outage repair and maintenance shutdowns. By the carefully controlled utilisation of specialist techniques like mirror welding and temper bead processes we are able to address issues and quickly return plant to service.

Learn more about our Industrial sector work

Our teams are deployed as fully self contained with:

• Welding plant and equipment (including appropriate LEV)
• Dedicated tooling and fabrication tool containers
• Certified welding consumables
• Welding gases
• NDT services and heat treatment (with established partners)
• Hole watch and management support teams
• Suitable and planned ventilation and respiration systems (All welders are supplied with a personal CleanSpace2® respirator)
• Issuance of Welding Quality record packs

Where we do it

Some of the markets we cover:

• Thermal Power Generation
• Down Stream Oil & Gas
• Process Plant
• Pharmaceuticals
• Food and Beverages
• Ducting
• Structural

Typically supplied in support of our other services. We are able to offer a complementary range of supply services related to equipment and material supply in-house.

We also work with other established partners if your supply requirements extend below those that we offer in-house.

Learn more about our Industrial sector work

Salko UK supplies plant to all industry sectors, including:

• Lighting equipment
• Heating, ventilation and cooling
• Site cable management systems
• Welding plant and equipment (including appropriate LEV)
• Electrical power / distribution 110 / 230 / 400v – (Extension Cables, Site transforms, junction boxes, distribution units, RCD units.)
• PPE & Safety equipment and consumables supply
• Onsite cutting and grinding tooling and equipment
• Site tooling for onsite services including dedicated tooling containers
• Site consumables
• Piping and pipe fittings
• Fabricated and sheet steel

Our capability in the procurement, installation and testing of Pipe Work in the Industrial sector is extensive. With its roots in the new construction of many power plants throughout the UK.

We are able to offer you services from complete new installations, to modification of existing systems. Through to onsite repairs for unplanned maintenance.

We can offer the entire scope of required works for your plant or design. From the sourcing and procurement of the materials through to the installation and testing.

This includes the required qualified, competent and experienced fitters, coded welders and site management. Pulling it all together to complete your project safely, with the required quality both on time and on budget.

Learn more about our Industrial sector work

What we do

Our current services include:

• New Installations
• Maintenance Services (routine and unplanned support)
• Material supply and offsite pre-fabrication
• Pipe fitting (including Swagelok), onsite fabrication works to ASME/BS EN/PED
• Removal and refitting of instrumentation
• Coded Welders, welding plant, consumables and NDT services
• Pressure testing
• Support systems
• Painting to required specification
• Specialist dedicated tooling container
• Full quality pack production
• Turnkey solutions

Where we do it

Some systems and projects we have worked on:

• Cooling systems
• Compressed air systems
• Pumping and dewatering packages
• Ducting and ventilation
• HVAC systems
• Installations and instrument pockets
• Piping support systems
• Steam systems, drain and leak off systems
• Pressure measurement instrumentation systems
• Air, nitrogen, oil, water, steam and gas systems

At Salko we provide a full range of support for mechanical and rotating equipment throughout the world. We know our customers deserve a contracting partner aiding them to maximise performance and minimise risk.

Our success is a direct result of our highly skilled workforce. Engaging with our clients to ensure a tailored package, allowing quality results every time. We are able to offer a variety of services for a large range of auxiliary equipment, both onsite and offsite.

This can be as a small team integrated into a larger onsite outage team or operating independently as a turnkey project.

Learn more about our Energy sector work

What we offer

Onsite overhaul and servicing of Auxiliary Equipment covered:

• Motor removal, overhaul and refitting (also offsite)
• Pump removal, overhaul and refitting (also offsite)
• Blow Off Valves
• VIGV actuators
• Pruss & Voith valves and actuators
• Coolers
• Fans
• Accumulators
• AMOT valves
• DP valves removal, overhaul and refitting (also offsite)
• Pneumatic valves removal, overhaul and refitting (also offsite)
• Solenoid Valves
• Dual Filters
• ST Stop/Control valves and actuators
• Adams valves

What we do

Our current services include:

• Planned and unplanned Maintenance
• Motor removal, onsite testing and install
• Mechanical inspections, scheduled overhauls and replacement of consumable/life expired parts
• Offsite overhauls (with established partners) including spares provision
• Transportation
• Pipe fitting, piping supports and fabrication/repairs
• Removal and refitting of instrumentation
• Swagelok trained
• Decommissioning (in particular fuel oil, MBN/MBU systems)
• Specialist dedicated tooling container
• Turnkey solutions

Salko’s capability in the installation, testing and maintenance of BOP systems in the CCGT market. This has helped organisations of all sizes to complete their projects, successfully.

We are able to offer you services from complete new installations. Offering both the mechanical and electrical skills required, through to ongoing maintenance and repairs.

Our in-house welding capabilities will cover all the requirements and tied with our pipe fitting services this makes for an excellent turkey solution for customers allowing work to progress smoothly, hitting targets and providing the levels of safety and quality that customers require.

Learn more about our Energy sector work

What we do

Our current services include:

• New Installations (for upgrades provided by others)
• Maintenance Services (routine and unplanned support)
• Pipe fitting (including Swagelok), onsite fabrication works, removal/refitting of instrumentation
• Coded Welders, welding plant and consumables
• NDT services and heat treatment (with established partners)
• Combined with EC&I support
• Specialist dedicated tooling container
• Full quality pack production
• Turnkey solutions

Where we do it

Some systems and projects we have worked on:

• Purge Credits
• Low Part Load
• ST Forced Cooling
• Fast Start
• FDS replacement
• Casing and support systems
• CHIP Pipes
• Crossover pipe and LP Hood (bellows)
• Gland steam, drain, leak off systems
• Cooling water & flash boxes
• Lube oil, Seal oil, Anti-icing, Closed cooling water and main steam systems

The Salko team have carried out repairs on most major casing types in the UK CCGT fleet be that GT or ST. We offer you a complete service. The team provides everything required to complete the repair onsite during your inspection.

We are able to offer our own coded welders working to Salko welder procedures for a wide variety of materials and welding processes, including cast materials.

Learn more about our Energy sector work

Where we do it

Some systems and projects we have worked on:

• GT Main casing
• CMAS
• Carriers
• LP/IP/HP casings
• Erosion rings

What we do

Our current services include:

• Assessment & repair recommendations
• Repair preparation of component
• Coded Welders, welding plant and consumables
• NDT and heat treatment services (with established partners)
• Specialist dedicated tooling container
• Pre and post reports
• Full quality pack production

Salko UK’s expertise in the design, installation, testing and maintenance of electrical systems has helped organisations of all sizes to implement flexible, scalable and manageable solutions that cater for all their needs today and into the foreseeable future.

Our Philosophy is to combine quality of service, whether you require a turnkey solution or are simply relocating or restructuring your current arrangements.

Salko UK’s experience and expertise will ensure minimal disruption and quality results delivered safely.

Learn more about our Energy sector work

What we do

Our current services include:

• New Installation (covering all station instruments and LV systems)
• Maintenance Services and Fault Diagnostics (routine and unplanned support)
• Initial and Periodic Inspection and Testing (including PAT Testing)
• ATEX / Hazardous Area Work (New install; Maintenance services; and Inspection)
• System design and energy case studies (excluding instrumentation systems)
• Site electrical supply survey, energy consumption plan and provision and installation of additional site temporary supplies

Where we do it

Some systems and projects we have worked on:

• Complete shaft line instrumentation systems for GT, ST and Generator
• ATOS and PV control card replacement
• Purge Credits ; Low Part Load ; Fast Start ; ST Forced Cooling Upgrades
• Control HW modifications (ADVANT)
• GT/ST Valve upgrades and replacements
• Power and Lighting (including emergency lighting systems)
• Power distribution (LV)

Typically supplied in support of our other services. We are able to offer a complementary range of supply services related to equipment and material supply in-house.

We also work with other established partners if your supply requirements extend below those that we offer in-house.

Learn more about our Energy sector work

Salko UK supplies plant to all industry sectors…

Including:

• Lighting equipment
• Heating, ventilation and cooling
• Site cable management systems
• Welding plant and equipment (including appropriate LEV)
• Electrical power / distribution 110 / 230 / 400v – (Extension Cables, Site transforms, junction boxes, distribution units, RCD units.)
• PPE & Safety equipment and consumables supply
• Onsite cutting and grinding tooling and equipment
• Site tooling for onsite services including dedicated tooling containers
• Site consumables
• Piping and pipe fittings
• Fabricated and sheet steel

Salko is able to offer a turnkey service to your GT26 exhaust system from the EGH through to diffuser 1 and 2.

We have extensive experience of repairs in a closed unit. Be it local patch repairs to the EGH inner liner, TAT bush replacement, NOx cross repairs, repair and installation of flow deflectors or crack repairs to the blow off canopy.

Once the unit is open we are able to complete larger scale works including nose cone replacement, Mercedes star strut removal and replacement, rib repairs and patch repairs to the inner and outer liners.

We can do a complete EGD 1 liner replacement. Including procurement of the liners, installation materials, insulation and its application and full site turnkey management.

Our team has the experience and have completed training from the OEM for the GT26 exhaust system in Switzerland.

Learn more about our Exhaust Repairs work

Where we do it

Some systems and projects we have worked on:

• Exhaust Gas Housing
• Exhaust Gas Diffuser 1
• Exhaust Gas Diffuser 2

What we do

Our current services include:

• Assessment & repair recommendations
• Design, procurement and fabrication of exhaust hot gas path components
• Pipe fitting, onsite fabrication works, removal of instrumentation
• Coded Welders, welding plant, consumables and NDT services
• Specialist dedicated tooling container
• Insulation services (with established partners)
• Pre and post reports
• Full quality pack production
• Turnkey solutions

We understand how important your equipment is to your business, therefore, we offer a full onsite calibration service to help minimise downtime and loss of revenue.

Salko’s expert technicians specialise in onsite plant calibrations, delivered safely, to schedule and with the quality right the first time.

Learn more about our Energy sector work

What we do

Our current services include:

• New Installations (covering all station instruments)
• Maintenance Services, Fault Diagnostics and Calibration (routine and unplanned support)
• ATEX / Hazardous Area Work (New install; Maintenance services; and Inspection)
• Transducer calibration, Data system Calibration and Physical End to End Calibration

Where we do it

Some systems and projects we have worked on:

• Full instrumentation GT, ST, Generator, HRSG and Balance of Plant
• Vibration systems
• SEV Lance TC inspect, test & replacement
• TAT replacement
• Bearing TC inspect, test & replacement
• Cooling air systems (MBH) TC inspect, test & replacement
• ATEX hazardous area inspections & reports
• Flame Detectors & Ignition Torches
• Valve & Solenoid inspect, test & replacement

Tube leaks on the GT26 OTC’s are a known issue.  Salko has the experience of carrying out leak searches on the HP and LP OTC and then completing the repair.

This involves cutting off the cap ends, carrying the pressure test to confirm the leaks, plugging the affected lines, retesting and then re-welding the cap ends with the required heat treatment and NDT.

All this can be carried out onsite by our experienced team.  Additionally we can install OTC preservation modifications.

Learn more about our OTC Repairs work >> [LINK > Case Study 2 – OTC Leak Search & Repair]

What we offer

OTC components covered for the GT26:

• HP OTC
• LP OTC

What we do

Our current services include:

• Assessment & repair recommendations
• Pressure testing and leak detection
• Pipe fitting and onsite fabrication works
• Coded Welders, welding plant and consumables
• NDT and heat treatment services (with established partners)
• Specialist dedicated tooling container
• Pre and post reports
• Full quality pack production
• Turnkey solutions

Supporting global field service operations with the provision of quality manpower resources, from ‘senior-management’ to operational and craft labour.

The Salko UK Ltd team have been involved in the oil & gas industry from the first CCGT constructions in the UK. Securing and maintaining both existing and additional service contracts across multiple disciplines.

Specialising in; Gas Turbines, Steam Turbines, Generators, Balance of Plant operations and all aspects of EC&I works.

Learn more about our Energy sector work

What we offer

Provisions of our current services include:

• Remote or Onsite Project Support
• Lead Supervision – Technical field advice – (GT, Balance of Plant, EC&I, Commissioning, Assessment and Material management)
• Quality, Health, Safety and Environmental Management and Control
• Customer / Client Support
• Unplanned outage management / support

With an experienced, professional and high quality team on board. Our proven track record and customer satisfaction enables exceptional project execution every time.

At Salko UK we provide a reliable catalogue of manpower, from a small-scale inspection to a full planned shutdown.

We can offer you what you need, when and where you need it. We will support you with 24/7 availability, years of experience, and uncompromising commitment.

Manpower provisions include the following:

• Electricians
• Pipe Fitters
• Welders
• Mechanical Fitters
• C&I Technicians
• Platers
• Operatives (Grade 3)
• Fork Lift Truck Operatives
• Material Handling
• Riggers / Rigger Crane Drivers
• EHS Advisors
• Site administrative support

The pipefitters and platers are all trained for working at height, manual handling, confined space and face fitted for their personal respirator mask that they carry with them to your site.

Our capability in the procurement, installation and testing of Pipe Work in the Energy sector is extensive. With its roots in the new construction of many power plants throughout the UK.

We are able to offer you services from complete new installations, to modification of existing systems. Through to onsite repairs for unplanned maintenance.

We can offer the entire scope of required works for your plant or design. From the sourcing and procurement of the materials through to the installation and testing.

This includes the required qualified and experienced fitters, coded welders and site management. Pulling it all together to complete your project safely, with the required quality both on time and on budget.

Learn more about our Energy sector work

What we do

Our current services include:

• New Installations
• Maintenance Services (routine and unplanned support)
• Material supply and offsite pre-fabrication
• Pipe fitting (including Swagelok), onsite fabrication works to ASME/BS EN/PED
• Removal and refitting of instrumentation
• Coded Welders, welding plant, consumables and NDT services
• Pressure testing
• Support systems
• Painting to required specification
• Specialist dedicated tooling container
• Full quality pack production
• Turnkey solutions
  

Where we do it

Some systems and projects we have worked on:

• Purge Credits, Low Part Load, Fast Start
• ST Forced Cooling
• FDS replacement
• ITABAR Installations and instrument pockets
• Piping support systems
• CHIP Pipes (MBH)
• Crossover pipe and LP Hood (bellows)
• Gland steam, drain and leak off systems
• Cooling water and flash box piping systems
• Blow down tank instrumentation piping
• Anti-icing systems
• Pressure measurement instrumentation systems
• Air, nitrogen, oil, water, steam and gas systems

Our expertise is underpinned by a comprehensive library of Welding Procedure Specifications. Mechanical integrity is assured through formal qualification to both ASME and British/ISO standards.

The team is made up of highly experienced industry professionals who are coded to both ISO and ASME standards. We specialise in manual arc welding processes covering MMA, MIG, MAG, TIG and Flux Cored. Through our technical support team we are able to deliver orbital and mechanised welding techniques and other processes as applications and requirements arise.

Our welders are coded to both ISO and ASME standards for pipework, pressure vessels, ducting, tanks and structural work. We cover carbon and creep resisting alloy steels, cryogenic steels, austenitic stainless and high nickel alloys. We are also able to quickly qualify and deliver to any additional requirements of our clients as needs arise. This can be a valuable benefit when responding to emerging demands common within outage repair and maintenance shutdowns. By the carefully controlled utilisation of specialist techniques like mirror welding and temper bead processes we are able to address issues and quickly return plant to service.

Learn more about our Energy sector work

Our teams are deployed as fully self contained with:

• Welding plant and equipment (including appropriate LEV)
• Dedicated tooling and fabrication tool containers
• Certified welding consumables
• Welding gases
• NDT services and heat treatment (with established partners)
• Hole watch and management support teams
• Suitable and planned ventilation and respiration systems (All welders are supplied with a personal CleanSpace2® respirator)
• Issuance of Welding Quality record packs

Where we do it

Some of the markets we cover:

• Thermal Power Generation
• Down Stream Oil & Gas
• Process Plant
• Pharmaceuticals
• Food and Beverages
• Ducting
• Structural